Product Overview:
NTSKY492 is an advanced tri-sensor zoom system integrating fixed-focus dual-spectrum cameras, a 1200m laser rangefinder module, and a high-precision 3-axis stabilized gimbal. Featuring dual video outputs (network IP + HDMI), the gimbal employs an encoder-based FOC (Field-Oriented Control) scheme delivering exceptional stability, compact size, lightweight construction, and low power consumption. The system incorporates two visible-light cameras: an 8-megapixel HD sensor and a 2MP wide dynamic range (WDR) sensor. Control of both cameras and gimbal is supported via serial interface①, SBUS, and network protocols, with dual-channel local recording/photography to microSD (TF) cards.
NOTE①: Serial Port: 3.3V LVTTL UART.
CLASSIFICATION:
Electro-Optical Pod, Visible Light Camera, 800m Laser Fill Light Dual-Sensor Gimbal Camera
TAB:
30× Optical Zoom, AI object tracking gimbal, Compact thermal imaging gimbal, Dual visible-light drone camera, Lightweight stabilized payload for drones, Low-latency RTSP streaming system, Rugged tri-sensor gimbal, S.BUS-controlled aerial camera, TF card dual recording system, Three-axis stabilized 4K camera, 640x512 thermal sensor for industrial use, 1200m Laser Rangefinding, 3-Axis stabilized PTZ, 9x digital zoom, 4K,1080P, 8-megapixel HD sensor,8MP, 270× Hybrid zoom, AI Target Detection & Tracking, Multiple Control Modes, 1/2.8 Inch 8M Pixels CMOS SENSOR, Focus in real time, Picture-in-Picture, 800m Laser Fill Light Dual, 2-megapixel HD, 2MP sensor, 800m Laser Fill Light,EO/IR Fixed-Focus Camera
WhatsApp: +43 67844091116
TEL: +86 18608017948(WeChat)
EMAIL: marketing@newtron-tech.com
PRIMARY FUNCTIONS
- Multi Picture-in-Picture (PIP) Modes
- 9× Digital Zoom
- 4K Photo Capture & Video Recording
- High-Precision Collaborative Control Algorithm
- AI Target Detection and Tracking
- Integrated Ground Control Software Suite
SPECIFICATIONS
NTSKY492 Miniaturized EO/IR Fixed-Focus Camera: 1200m LRF + Dual Video Streams | ||
Voltage | DC12V-26.2V, the instantaneous voltage of the power supply must not exceed 27V | |
Power Consumption | Dynamic: 6W | |
Technical Parameters | Pitch Angle | -30°~ +100° |
Yaw Angle | -140°~ +140° | |
Pitch and Roll Jitter Angle | ±0.02° | |
Horizontal Jitter Angle | ±0.03° | |
One-Click Restore | One-click restore to the initial position | |
Adjustable Gimbal Speed | Adaptive Speed Control (Visible Light Camera) | |
CMOS SENSOR | ||
Digital Zoom | 9× digital zoom | |
Storage | H264,H265, Local TF card 4K | |
Field of Vision(FOV) | 25mm lens FOV: 10.5°× 7.8° | |
1080P Camera | CMOS SENSOR | 2MP CMOS Sensor |
Digital Zoom | 9× digital zoom | |
Storage | H264,H265, Local TF card 1080P | |
Field of Vision(FOV) | 6mm lens FOV:60°× 43° | |
HDMI Video | Micro-D HDMI 1080P 60fps | |
Laser Ranging | Wavelength | 905nm (class 1 laser) |
Target Detection Range | 5~1200m | |
Accuracy | ±1m | |
Target recognition and tracking | Min tracking target size | 16×16 pixels |
Max tracking target size | 256×256 pixels | |
Maximum Allowable Occlusion Time | 2 seconds | |
Tracking speed | 50 Pixel/Frame max | |
Simultaneous detection qty | 100 targets max | |
Recognized categories | Human and Vehicle | |
Min detection target size | 32×32 pixels | |
Storage Capacity | 128G TF card; class6 and above; | |
Network Output Mode | 1080P 30fps /4K 30fps | |
Control mode | IP, UART,SBUS (PWM optional) | |
Control Interface | TTL | |
Gimbal Size | 72mm×72mm×105mm | |
Working Condition | -10℃ to +45℃ / 20% to 80% RH | |
Storage Environment | -20℃ to +60℃ / 20% to 95% RH | |
Weight | 220±10g |
Connection application diagram
Electrical interface
No | Part | Interface Type | Define | Function |
1 | 10PIN | Communication Protocol | Tx+ | Network Ports |
2 | Communication Protocol | Tx- | Network Ports | |
3 | Communication Protocol | Rx+ | Network Ports | |
4 | Communication Protocol | Rx- | Network Ports | |
5 | Communication Protocol | SBUS | SBUS Input | |
6 | Signal Ground | GND | GND | |
7 | RX | UART receiving | ||
8 | Communication Protocol | TX | UART sending | |
9 | Power Ground | GND | GND | |
10 | Power Interface | VCC | DC 12V-26.2V |
*Note: Device may change structure due to product update. Please connect to NTRON to get newest datasheet.
Device Structure
UNIT:mm